digi.xbee.packets.wifi module¶

class digi.xbee.packets.wifi.IODataSampleRxIndicatorWifiPacket(source_address, rssi, receive_options, rf_data=None)[source]¶

Bases: digi.xbee.packets.base.XBeeAPIPacket

This class represents a IO data sample RX indicator (Wi-Fi) packet. Packet is built using the parameters of the constructor or providing a valid API payload.

When the module receives an IO sample frame from a remote device, it sends the sample out the UART or SPI using this frame type. Only modules running API mode will be able to receive IO samples.

Among received data, some options can also be received indicating transmission parameters.

See also

XBeeAPIPacket

Class constructor. Instantiates a new IODataSampleRxIndicatorWifiPacket object with the provided parameters.

Parameters

source_address (ipaddress.IPv4Address) – the 64-bit source address.
rssi (Integer) – received signal strength indicator.
receive_options (Integer) – bitfield indicating the receive options.
rf_data (Bytearray, optional) – received RF data. Optional.

Raises

ValueError – if rf_data is not None and it’s not valid for create an IOSample.

See also

IOSample
ipaddress.IPv4Address
ReceiveOptions
XBeeAPIPacket

static create_packet(raw, operating_mode)[source]¶

Override method.

Returns

IODataSampleRxIndicatorWifiPacket.

Raises

InvalidPacketException – if the bytearray length is less than 16. (start delim. + length (2 bytes) + frame type + source addr. (4 bytes) + rssi + receive options + rf data (5 bytes) + checksum = 16 bytes).
InvalidPacketException – if the length field of ‘raw’ is different from its real length. (length field: bytes 2 and 3)
InvalidPacketException – if the first byte of ‘raw’ is not the header byte. See SpecialByte.
InvalidPacketException – if the calculated checksum is different from the checksum field value (last byte).
InvalidPacketException – if the frame type is not ApiFrameType.IO_DATA_SAMPLE_RX_INDICATOR_WIFI.
InvalidOperatingModeException – if operating_mode is not supported.

See also

XBeePacket.create_packet()

XBeeAPIPacket._check_api_packet()

needs_id()[source]¶: Override method.

See also

XBeeAPIPacket.needs_id()

property source_address¶

Returns the IPv4 address of the source device.

Returns: the IPv4 address of the source device.
Return type: ipaddress.IPv4Address

See also

ipaddress.IPv4Address

property rssi¶

Returns the received Signal Strength Indicator (RSSI).

Returns: the received Signal Strength Indicator (RSSI).
Return type: Integer

property receive_options¶

Returns the receive options bitfield.

Returns: the receive options bitfield.
Return type: Integer

See also

ReceiveOptions

property rf_data¶

Returns the received RF data.

Returns: the received RF data.
Return type: Bytearray

property io_sample¶

Returns the IO sample corresponding to the data contained in the packet.

Returns

the IO sample of the packet, None if the: packet has not any data or if the sample could not be generated correctly.

Return type

IOSample

See also

IOSample

property frame_id¶

Returns the frame ID of the packet.

Returns: the frame ID of the packet.
Return type: Integer

get_checksum()¶

Returns the checksum value of this XBeePacket. The checksum is the last 8 bits of the sum of the bytes between the length field and the checksum field.

Returns: checksum value of this XBeePacket.
Return type: Integer

See also

factory

get_frame_spec_data()¶: Override method.

See also

XBeePacket.get_frame_spec_data()

get_frame_type()¶

Returns the frame type of this packet.

Returns: the frame type of this packet.
Return type: ApiFrameType

See also

ApiFrameType

get_frame_type_value()¶

Returns the frame type integer value of this packet.

Returns: the frame type integer value of this packet.
Return type: Integer

See also

ApiFrameType

is_broadcast()¶

Returns whether this packet is broadcast or not.

Returns: True if this packet is broadcast, False otherwise.
Return type: Boolean

output(escaped=False)¶

Returns the raw bytearray of this XBeePacket, ready to be send by the serial port.

Parameters: escaped (Boolean) – indicates if the raw bytearray must be escaped.
Returns: raw bytearray of the XBeePacket.
Return type: Bytearray

to_dict()¶

Returns a dictionary with all information of the XBeePacket fields.

Returns: dictionary with all info of the XBeePacket fields.
Return type: Dictionary

static unescape_data(data)¶

Un-escapes the provided bytearray data.

Parameters: data (Bytearray) – the bytearray to unescape.
Returns: data unescaped.
Return type: Bytearray

class digi.xbee.packets.wifi.RemoteATCommandWifiPacket(frame_id, dest_address, transmit_options, command, parameter=None)[source]¶

Bases: digi.xbee.packets.base.XBeeAPIPacket

This class represents a remote AT command request (Wi-Fi) packet. Packet is built using the parameters of the constructor or providing a valid API payload.

Used to query or set module parameters on a remote device. For parameter changes on the remote device to take effect, changes must be applied, either by setting the apply changes options bit, or by sending an AC command to the remote node.

Remote command options are set as a bitfield.

If configured, command response is received as a RemoteATCommandResponseWifiPacket.

See also

RemoteATCommandResponseWifiPacket

XBeeAPIPacket

Class constructor. Instantiates a new RemoteATCommandWifiPacket object with the provided parameters.

Parameters

frame_id (integer) – the frame ID of the packet.
dest_address (ipaddress.IPv4Address) – the IPv4 address of the destination device.
transmit_options (Integer) – bitfield of supported transmission options.
command (String) – AT command to send.
parameter (Bytearray, optional) – AT command parameter. Optional.

Raises

ValueError – if frame_id is less than 0 or greater than 255.
ValueError – if length of command is different than 2.

See also

ipaddress.IPv4Address
RemoteATCmdOptions
XBeeAPIPacket

static create_packet(raw, operating_mode)[source]¶

Override method.

Returns

RemoteATCommandWifiPacket

Raises

InvalidPacketException – if the Bytearray length is less than 17. (start delim. + length (2 bytes) + frame type + frame id + dest. addr. (8 bytes) + transmit options + command (2 bytes) + checksum = 17 bytes).
InvalidPacketException – if the length field of ‘raw’ is different from its real length. (length field: bytes 2 and 3)
InvalidPacketException – if the first byte of ‘raw’ is not the header byte. See SpecialByte.
InvalidPacketException – if the calculated checksum is different from the checksum field value (last byte).
InvalidPacketException – if the frame type is not ApiFrameType.REMOTE_AT_COMMAND_REQUEST_WIFI.
InvalidOperatingModeException – if operating_mode is not supported.

See also

XBeePacket.create_packet()

XBeeAPIPacket._check_api_packet()

needs_id()[source]¶: Override method.

See also

XBeeAPIPacket.needs_id()

property dest_address¶

Returns the IPv4 address of the destination device.

Returns: the IPv4 address of the destination device.
Return type: ipaddress.IPv4Address

See also

ipaddress.IPv4Address

property transmit_options¶

Returns the transmit options bitfield.

Returns: the transmit options bitfield.
Return type: Integer

See also

RemoteATCmdOptions

property command¶

Returns the AT command.

Returns: the AT command.
Return type: String

property parameter¶

Returns the AT command parameter.

Returns: the AT command parameter.
Return type: Bytearray

property frame_id¶

Returns the frame ID of the packet.

Returns: the frame ID of the packet.
Return type: Integer

get_checksum()¶

Returns the checksum value of this XBeePacket. The checksum is the last 8 bits of the sum of the bytes between the length field and the checksum field.

Returns: checksum value of this XBeePacket.
Return type: Integer

See also

factory

get_frame_spec_data()¶: Override method.

See also

XBeePacket.get_frame_spec_data()

get_frame_type()¶

Returns the frame type of this packet.

Returns: the frame type of this packet.
Return type: ApiFrameType

See also

ApiFrameType

get_frame_type_value()¶

Returns the frame type integer value of this packet.

Returns: the frame type integer value of this packet.
Return type: Integer

See also

ApiFrameType

is_broadcast()¶

Returns whether this packet is broadcast or not.

Returns: True if this packet is broadcast, False otherwise.
Return type: Boolean

output(escaped=False)¶

Returns the raw bytearray of this XBeePacket, ready to be send by the serial port.

Parameters: escaped (Boolean) – indicates if the raw bytearray must be escaped.
Returns: raw bytearray of the XBeePacket.
Return type: Bytearray

to_dict()¶

Returns a dictionary with all information of the XBeePacket fields.

Returns: dictionary with all info of the XBeePacket fields.
Return type: Dictionary

static unescape_data(data)¶

Un-escapes the provided bytearray data.

Parameters: data (Bytearray) – the bytearray to unescape.
Returns: data unescaped.
Return type: Bytearray

class digi.xbee.packets.wifi.RemoteATCommandResponseWifiPacket(frame_id, source_address, command, response_status, comm_value=None)[source]¶

Bases: digi.xbee.packets.base.XBeeAPIPacket

This class represents a remote AT command response (Wi-Fi) packet. Packet is built using the parameters of the constructor or providing a valid API payload.

If a module receives a remote command response RF data frame in response to a Remote AT Command Request, the module will send a Remote AT Command Response message out the UART. Some commands may send back multiple frames for example, Node Discover (ND) command.

This packet is received in response of a RemoteATCommandPacket.

Response also includes an ATCommandStatus object with the status of the AT command.

See also

RemoteATCommandWifiPacket
ATCommandStatus
XBeeAPIPacket

Class constructor. Instantiates a new RemoteATCommandResponseWifiPacket object with the provided parameters.

Parameters

frame_id (Integer) – the frame ID of the packet.
source_address (ipaddress.IPv4Address) – the IPv4 address of the source device.
command (String) – the AT command of the packet. Must be a string.
response_status (ATCommandStatus) – the status of the AT command.
comm_value (Bytearray, optional) – the AT command response value.

Raises

ValueError – if frame_id is less than 0 or greater than 255.
ValueError – if length of command is different than 2.

See also

ATCommandStatus

ipaddress.IPv4Address

property frame_id¶

Returns the frame ID of the packet.

Returns: the frame ID of the packet.
Return type: Integer

get_checksum()¶

Returns the checksum value of this XBeePacket. The checksum is the last 8 bits of the sum of the bytes between the length field and the checksum field.

Returns: checksum value of this XBeePacket.
Return type: Integer

See also

factory

get_frame_spec_data()¶: Override method.

See also

XBeePacket.get_frame_spec_data()

get_frame_type()¶

Returns the frame type of this packet.

Returns: the frame type of this packet.
Return type: ApiFrameType

See also

ApiFrameType

get_frame_type_value()¶

Returns the frame type integer value of this packet.

Returns: the frame type integer value of this packet.
Return type: Integer

See also

ApiFrameType

is_broadcast()¶

Returns whether this packet is broadcast or not.

Returns: True if this packet is broadcast, False otherwise.
Return type: Boolean

output(escaped=False)¶

Returns the raw bytearray of this XBeePacket, ready to be send by the serial port.

Parameters: escaped (Boolean) – indicates if the raw bytearray must be escaped.
Returns: raw bytearray of the XBeePacket.
Return type: Bytearray

to_dict()¶

Returns a dictionary with all information of the XBeePacket fields.

Returns: dictionary with all info of the XBeePacket fields.
Return type: Dictionary

static unescape_data(data)¶

Un-escapes the provided bytearray data.

Parameters: data (Bytearray) – the bytearray to unescape.
Returns: data unescaped.
Return type: Bytearray

static create_packet(raw, operating_mode)[source]¶

Override method.

Returns

RemoteATCommandResponseWifiPacket.

Raises

InvalidPacketException – if the bytearray length is less than 17. (start delim. + length (2 bytes) + frame type + frame id + source addr. (8 bytes) + command (2 bytes) + receive options + checksum = 17 bytes).
InvalidPacketException – if the length field of ‘raw’ is different from its real length. (length field: bytes 2 and 3)
InvalidPacketException – if the first byte of ‘raw’ is not the header byte. See SpecialByte.
InvalidPacketException – if the calculated checksum is different from the checksum field value (last byte).
InvalidPacketException – if the frame type is not ApiFrameType.REMOTE_AT_COMMAND_RESPONSE_WIFI.
InvalidOperatingModeException – if operating_mode is not supported.

See also

XBeePacket.create_packet()

XBeeAPIPacket._check_api_packet()

needs_id()[source]¶: Override method.

See also

XBeeAPIPacket.needs_id()

property source_address¶

Returns the IPv4 address of the source device.

Returns: the IPv4 address of the source device.
Return type: ipaddress.IPv4Address

See also

ipaddress.IPv4Address

property command¶

Returns the AT command of the packet.

Returns: the AT command of the packet.
Return type: String

property status¶

Returns the AT command response status of the packet.

Returns: the AT command response status of the packet.
Return type: ATCommandStatus

See also

ATCommandStatus

property command_value¶

Returns the AT command response value.

Returns: the AT command response value.
Return type: Bytearray